Cleaning the Filter of the Range Hood 

Have you ever tried peeking underneath the range hood and examined the fan filters of the exhaust? Be careful, it is going to be nasty if you have never done it or if it has been awhile. Collecting grease is the main purpose of the filter of the vent hood. Therefore, it is going to feel and look greasy if it is properly doing its job. Range Hood

Over a long period of time, the filter might become so congested with grime and grease that it mislays its efficiency. That is the reason why it is significant to periodically clean the filters. Luckily, cleaning the filter is not that difficult. 

This article will teach you how to clean the filter in the range hood. Several hood filters could somehow be washed in your dishwasher. However, a lot of professionals would not suggest it without cleaning them first at least depending on how long the filter has been since you have cleaned it.  

Check the Filter Every Month 

Clean the range hood on a weekly or daily basis. However, unless you always deep-fry a lot of meals on a regular basis, you should not worry about dealing about the filter that frequently. Examine the filter once a month. Plan on replacing it or cleaning it as soon as possible if it appears splattered or stained. Filters usually don’t acquire much grime if you do not cook often.  

Remove the Filter 

A filter could be held into place in a lot of various methods. Try to look at your filter. It would be likely attached by screws, rim supports that simply required being rotated and pushed up, a latch that you need to lift and press, or a fastener that you could rotate out and in of place.  

Replace the Charcoal and Fabric Filters 

Do not try to clean the filters if you have either of those types. Just remove the dirty one out and replace a brand new one. But, remember that you only need to install a new one if you have a ductless vent hood with charcoal filters.  

A ductless vent hood means that the exhaust fan is recirculating the air back and forth into your kitchen. You don’t have the need to replace the charcoal filter if the exhaust is being aerated out of the home via ducts.  

Soak Metal Filters in Water and Cleaner 

Fill a pale or the sink with warm water. To degrease it, add the suggested amount of a tougher cleaning solution or dish soap to the hot water. Let the filter soak for a few min. (preferably 10 min. up to 30 min.). After that, agitate the filter in the water to shake off any free grime. To scrub any hard dirt, utilize a bristle brush. After that, rinse the filter using a strong pressure of water. You could use the sprayer attachment of your faucet.  

Before reinstalling the filter, set it on a drying rack or a clean towel and let it dry in the air.  

Read More

How to Maintain Your Range Hood 

Cooking meals produces smoke, heat, moisture, and grease that could damage walls and cabinets over time. To remove smoke, moisture, and grease and protect the cabinets, range hoods are better installed in the kitchen. Aside from that, it could also give light for the cooking surface underneath it.

Range Hood

Here are some ways to maintain your range hood: 

Clean It 

Be careful, before you clean the range hood, you should ensure that it is turned off. Utilize a degreaser or a gentle household cleaning spray to eliminate dirt and grease from the exterior and interior of your hood. Prevent directly spraying the cleaning solution onto the light bulb socket, light bulb, or other electrical parts. 

Be Sure a Clean Air Filter is Installed 

The silvery and thin screen is called the hood filter. Depending on the model, there might be more than 1 filter. The filter traps grease and airborne oils to keep them out of the exhaust vent and the blower. To clean it, remove the filter and drench it in a tough cleaning solution until the grime is removed. Then, wash the filter using a soapy and warm water to eliminate any bits of the solution. Next, place the filter in the upper portion of your dishwasher and turn it on via a normal cycle. Be sure that it is dried thoroughly before reinstalling it to the unit. 

The hood might have one or more activated charcoal filters if it circulates air, instead of ventilating it outside. This might also work as your grease filter. This type of filter can’t be renewed or cleaned. Just replace them every time they lose effectiveness or every year. 

Clean your Vent 

You must examine regularly the duct that leads from the range hood to the outside if your range hood ventilates air outside, instead of circulating it. This is to ensure that there’s no buildup of grease inside it. It could cause huge damage if the buildup of grease catches fire. Call a range hood cleaning professional if there is a buildup of grease. They will properly clean the vent for you. 

Pay Attention to the Speed of the Motor Fan 

Though almost all range hood fan motors do not require any maintenance, the bearing of the motor might become stiff because of the continuous exposure to grease, humidity, and heat. You would need to replace the motor when that occurs. In addition to that, the blower wheel would become dirty and greasy over time. This would slow the fan down or might cause vibration. Take out the wheel and clean it using a cleaner. You would need to replace the motor if the fan still vibrates or is still slow after cleaning it. 

Repair the Vent Hood as Required 

There are a lot of professionals out there who clean and repair vent hoods. If you find any issues with your unit, it is better to have a professional examine it to avoid any further damages.  

Read More